On 5/27/2014 8:59 AM, dadiOH wrote:

If you want to keep them from being pulled out but still removeable, extend
a portion of the back upwards so it will hit the horizontal stop in the
frame when the drawer is all the way forward, then round over the bottom
edge of the back, including the sides where they meet the back. Remove the
drawer by lifting the front up until the extended back clears the stop.

Same concept, but even simpler, quicker and easier way to insure a
drawer pulls out only as far as you want it to:

https://picasaweb.google.com/1113554...2 33476839170

To pull the drawer all the way out, simply reach in and turn the drawer
stop a quarter turn.

--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)