View Single Post
  #46   Report Post  
Posted to sci.electronics.design,alt.binaries.schematics.electronic,sci.electronics.cad,sci.electronics.basics
John Larkin[_3_] John Larkin[_3_] is offline
external usenet poster
 
Posts: 231
Default Garage Door Opener Range.

On Thu, 08 May 2014 19:44:21 -0500, John Fields
wrote:

On Wed, 07 May 2014 13:27:29 -0700, Jim Thompson
wrote:

This new, very well-insulated, foil-backed, house has one drawback...
the garage door opener range with the garage door closed is only about
20'

Any ideas on how I could extend that range?

...Jim Thompson


---
What I'd do would be to drill a hole through the garage wall next to
the door but up high, then connect a length of 50 ohm coax to a
weatherproof 900MHz rubber duckie antenna with a 90 degree mounting
flange/bracket and pass the coax through the hole from the outside
of the garage to the inside.

Next, I'd mount the rubber duckie to the outside wall with the whip
oriented vertically, and weatherize the installation.

Finally, I'd mount another rubber duckie on the inside wall, with
the whip oriented vertically, and connect the coax.

Voila! passive repeater, - probably with some gain - nice clean
install, and your warranty stays intact since you haven't even
touched the holy RX.

John Fields


Gain?


--

John Larkin Highland Technology, Inc

jlarkin att highlandtechnology dott com
http://www.highlandtechnology.com