View Single Post
  #5   Report Post  
Posted to alt.binaries.schematics.electronic
Martin Riddle Martin Riddle is offline
external usenet poster
 
Posts: 367
Default Unknowm connector (to me)

On Wed, 16 Apr 2014 19:22:06 +0200, "petrus bitbyter"
wrote:



"Robert Baer" schreef in bericht news
petrus bitbyter wrote:
Anyone recognises this connector? There's no single sign or mark on it
to indentify. First thought JSP but could not find it. Tried Farnell. No
joy.

petrus bitbyter

The closest i could find was the Molex 90136-1208, and that was a
poor "match".
The shape of the pins are rather unusual; i suspect a specialized
power connector.
It might help to give dimensions: pin spacing, shroud dimensions.
Looks like vertical PCB mount.

The pictures as shown by my browser has been cut on all four sides. Using a
picture viewer shows the whole picture. It looks like a boxed header like
the Molex you mentioned, though it is not vertical mounted but sideways.
Dimensions 28x7,5x4mm ex the soldering pins just visible underneath the PCB
on one of the pictures. They're about 3mm. Spacing is 2mm. It's on a PCB
with a switch matrix in a YAMAHA wind instrument. It's a CMOS environment
so there's not much current.

Thanks so far.

petrus bitbyter



There are clones out there of mostly Molex and JST.

Cheers