View Single Post
  #2   Report Post  
Posted to alt.home.repair
[email protected] clare@snyder.on.ca is offline
external usenet poster
 
Posts: 18,538
Default Kohler Command 21 "Blowing OIL"

On Fri, 11 Apr 2014 21:45:09 +0000, Daddyhog
wrote:

I have a Gravely ZT 2148 w/Kohler Command V-Twin model CV23. I have
recently serviced with new air/oil filter along with oil change. The motor
turns over but does not run. It will run by pouring fuel into carb. The
clear fuel filter shows no fuel being drawn into it while cranking. I
replaced fuel pump with new and it started to work properly and ran fine.
I mowed my yard and engine suddenly died. I inspected fuel filter and
there was no gas although gas in tank. I pulled pickup tube and checked
screen which is fine. Mower will run if I pour gas in carb. During
cranking there is no gas being drawn into fuel filter. I also have a lot
of oil coming from PVC where inserts into valve cover. I replaced the
grommet with a new one and it is already torn. Could my crankcase breather
be clogged? I removed my oil fill cap and cranked and there is a lot of
oil shooting out????

Is the gas going into the oil from a popped fuel pump diaphragm??
Sure sounds like it to me. Check the oil level and sniff it. If it is
high and smells like gas, youve found your problem.