"Gramps' shop" wrote:

I'm making a base for a coffee table and my design thoughts are aiming
at an S-shaped form. The form would be about an 8-inch sandwich The
top is a large filch of white oak. Has anyone any experience with
bendable plywood? I've found these folks online:
http://www.kerfkore.com/ and there is a distributor close enough to
warrant a visit.
------------------------------------------------
Here in SoCal, you can get "Bending Ply" at most any of the
real lumber yards,

Typically 1/4" with all the grains oriented in the same direction
so it can be bent.

The stuff I saw used was Poplar but assume other veneers are
available.

Lew