On Thu, 06 Mar 2014 09:32:49 -0400, Miles wrote:
I have a camera with no lens-thread at the outboard end. I think I
can glue on a bit that will give me one. On the lens barrel there's a
small section of (slightly tapered) inner diameter available - it's
the only surface I can use.
It's either anodized or painted black.
The bit I make will be aluminum. What glue should I use, and if the
barrel is anodized should I prep the surface?
(This is right next to the glass = have to be careful if prepping).
Greetings Miles,
I have a Sony camera that doesn't have any way to change lenses or to
mount extra lenses to the existing one. My solution was to make a lens
mount that uses the 1/4-20 tripod thread in the bottom of the camera
to hold it to the camera and to take all the weight of the lens. It is
basically an aluminum tube with threads on the outboard end for the
aux. lens. The tube is just a bit longer than the amount the camera
lens sticks out at maximum extension. So that when an aux. lens is
screwed into the tube the camera lens won't crash into it. At the end
of the tube where it contacts the camera body is a counterbore that
fits a ring shaped feature on the camera body. This feature only
protrudes from the camera body about .030" but it is concentric to
the lens. Coming off the side of the tube is a sort of "bent arm"
that has a hole drilled through it for a 1/4-20 screw to thread into
the tripod mount. I also put in a 1/4-20 tapped hole in the arm so
that the camera can still be mounted to a tripod when the lens adapter
is in place. The setup works well and I have been able to take some
neat pictures with a 180 degree fish eye lens and some macro pictures
with close up lenses. I made the thing myself so I can't tell you
where to buy one, but since this is a metalworking group you should
just make one. Since my adapter attaches to the camera via the tripod
mount there is no problem hanging lenses off the camera that weigh
more than the camera itself. If you want I could send you some
pictures of the device.
Cheers,
Eric
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com