DIYbanter - View Single Post

amdx[_3_]

On 3/5/2014 12:17 PM, wrote:
Hmmm, the std16ne10 says something about 2100 pF. Seems a bit high.

This all a little confusing to me. The suggested mod uses high current
FETs (12 or 15 amp). Just doesn't seem correct.
Looking at the schematic it shows 165 ohms in series with each plate,
with a B+ of 53V, the current would be limited to 320ma.

Here's a schematic I found that makes more sense regarding high voltage
low current..
http://michaelgellis.tripod.com/scope/vert.html

Mikek