unisaw wiring? 20 or 30 amp circuit?
On Wed, 28 Jul 2004 14:44:09 GMT, skeezics
wrote:
thank you all for the advice. an electrician told me 20 amp was
minimum code and should be fine but not to add any 110 outlets off
that. if i were to do that he said go to 25 or 30 amp. both the
compressor and the saw have newish motors so i guess 12 wire and 20
amp will be ok. if it proves to be a problem i can change it after the
inspection. the shop is unfinnished so changing stuff is no big deal.
skeez
|