I had the same in my shop. Both are wired to 20amp circuits and work
fine. I did the work myself but had it inspected and approved by a
licensed electrician who said the 20A was correct.


skeezics wrote in message . ..
im wiring my shop and have 2 pieces of equipment i am not sure of. a
true 3 hp compressor and a 3 hp unisaw. is a 20 amp circuit enough for
each or these or do i need to go to 25 or 30 amp? the compressor says
it needs 15.4 amps and the tablesaw says 15.5 amps. thanks all ...


skeez