Thread
:
Toilet dirty at rim holes
View Single Post
#
7
Posted to alt.home.repair
[email protected]
[_2_]
external usenet poster
Posts: 6,399
Toilet dirty at rim holes
On Wednesday, January 15, 2014 9:28:47 PM UTC-5, Oren wrote:
On Wed, 15 Jan 2014 20:55:47 -0500,
wrote:
Pix:
http://s1201.photobucket.com/user/sh...dirty.jpg.html
I replaced the entire valve assembly and the flapper.
Still, the toilet dirt lines appear, as can be viewed on the pix.
What should I do next?
tia
Read this link carefully about using muriatic acid to clean the bowl
rim jets. Carefully if on a septic system as it requires baking soda
to neutralize the acid before a flush.
The "dirt" - slime is coming from the rim bowl jets.
http://www.wikihow.com/Fix-a-Slow-Toilet
Plenty of old threads in AHR about it. You could use some muriatic
acid in the bowl, brush with a nylon toilet brush, the stains will
come back sooner, unless the rim jets are cleaned.
Side view of the rim jets (flush passages), etc.
http://www.hometips.com/wp-content/uploads/2012/06/toilet-plumbing-diagram.gif
Or buy one of the rust stain removal products, like CLR,
etc that are available at hardware store, HD, etc. On
the stains like that I used it on it disappeared almost
instantly, no scrubbing, just applying it.
Reply With Quote
[email protected]
[_2_]
View Public Profile
Find all posts by
[email protected]
[_2_]