On 05/01/2014 07:53, Jeff Urban wrote:
I wanted to reply to this when you first posted it but I couldn't for
whatever reason. ****ing thing. As you can see I am not posting from
google, which I no longer capitalize !!!! LOL

Anyway, what characterizes ANY part for the transmission of audio is
linearity. Even though the gate of a MOSFET is driven wildly different
than the base of a BPT, linearity of gain fro the very small signal to
the very large signal is the prime. We used to look at the hfe and HFE
gain curves of bipolars in the old days, not it is different.

Any kinds of spurious **** like oscillations would be no good in
switcxhers as well. the thing is, switchers somethimes have a gain curve
that is like, made to be on or off.

An audio transistor must operate in the analog range, that means the
gain curve should be as flat as possible through the operating current
range.

The same is true of a MOSFET.


Ah at last , thanks, a pertinent reply to my original question. I was
wondering if it was a larger area of silicon so the heat can migrate out
of the die quicker. So from what you say a non-audio switcher mosfet
could be used for analogue but the power rating would have to be derated
and no other qualification for such use, anymore than usual precautions
you would use for a switcher situation. I suppose the amount of derating
would then depend on the type of use bass amp v GP audio amp, dance
music v classical music etc