In article , fred scribeth thus
In article , tony sayer
writes
In article , Vir Campestris vir.campest
scribeth thus
On 01/01/2014 14:23, tony sayer wrote:
Crimps are fine used them for years on many differing projects currents
cables and voltages and never a problem. However do use decent ratchet
crimpers like this,

http://www.toolstation.com/shop/p11261

But NOT like these useless ones;!..

http://www.toolstation.com/shop/Hand...%20Tools/Crimp
ing%20Pliers/d10/sd170/p82229
--
Having just put a couple of crimps on with a pair just like the latter -
they need a bit of welly on the squeeze, but the crimp didn't want to
come off. What's the problem with them?

Andy

They don't put sufficient overall "size" pressure on the crimp ..

And because you never know whether the pressure applied on a non ratchet
tool has been enough to complete a proper joint. If not then you don't
get a gas tight joint and don't find out until it goes high resistance
later (thro' looseness or corrosion) and the joint or the loop
overheats.


Precisely, couldn't have put it better myself..
--
Tony Sayer