In article , "George" george@least
wrote:

Not an engineer, but imagine the optimum transport pipe is probably ~5".
Force/unit area calcs show 6" less than half the four.

Perhaps someone can point out the error of my thinking on this subject...

The system can only flow as much as the smallest port in the factory
design. Take my Jet 1.5hp for example, what I'm getting at is that the
port and hose from the blower housing to the bag hanging ring is, I
believe, 5" diameter. To my thinking whatever size of the system outside
of the factory setup is limited by this 5" - in other words, one can't
fully draw 6" of main trunk air before the blower through a 5" hose
after the blower - therefore the appropriate size of the main trunk
should be no larger than 5" - or whatever the size of the smallest port
in the manufactured assembly.

Wadya think?

--
Owen Lowe and his Fly-by-Night Copper Company