On Tuesday, November 5, 2013 1:26:16 PM UTC-5, Tim Wescott wrote:
I was going to say "acrylic", but then I realized that maybe I would be
narrowing it down too much.
How hard is it to machine a part out of hard clear plastic and then make
it clear again? Any gotchas? What plastic should one start with? What
question am I failing to ask?
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
Flame polishing or just polishing.
http://www.harborfreight.com/12-minu...kit-65938.html
Dan