Finishing problem - blotchy maple
On 10/3/2013 9:38 PM, MJ wrote:
Ok, I am working on a rocker and I am applying a finish to the rear splats that are rounded.
I've made them out of maple - curly - and applied a Watco finish to the first three. Ugly blotchiness. I read to use the Minwax stain conditioner, so I bought a small can and applied it to a test piece. I applied the conditioner and then applied the Watco. Still the same problem.
the conditioner should dry before you use it.
Everything is sanded to 220.
I'm next thinking of using a thin coat of shellac first then applying the Watco. Question - is this the best course of action? Of course, I'll try it on a test piece first. I know I'll end up with a lighter color then what I had before, but that will be ok.
Shellac is a great pre-stain.. Thin is quite a bit. make sure it's
dewaxed shellac.
The watco is oil right, I didn't know oil splotched. Stain yes, dye yes,
oil... didn't know that.
Any help is most appreciative.
Thanks in advance.
MJ
--
Jeff
|