View Single Post
  #8   Report Post  
Posted to alt.home.repair
Oren[_2_] Oren[_2_] is offline
external usenet poster
 
Posts: 22,192
Default Sheet vinyl vs. tile ??

On Sun, 1 Sep 2013 11:57:58 -0400, "Ralph Mowery"
wrote:


"TomR" wrote in message news:kvvm6u$8sb$1@dont-
Home Depot and Lowes sell 6' x 9' sheet vinyl in case that helps. But then
you have the install issue. It is hard to get the cuts right. If it is
new construction, and you can do the floor before putting in the fixtures
and door, that can make it a lot easier.


One easy way to make sure you get the cuts right on a small area is to use
some paper. You can get a roll that is made to be a painters drop cloth.
tape 2 to 3 pieces of it together to get what you need to cover the floor.
Cut the paper to fit the room and then use it as a template to cut the
vinyl.


....in addition, keep in mind that the vinyl will have a pattern of 2
or 3 ft. on center. Ensure the vinyl is cut so the pattern is
straight and does not run off in one direction or another.

Just sayin'.