DIYbanter - View Single Post

The Natural Philosopher[_2_]

On 27/07/13 21:06, Farmer Giles wrote:
On 27/07/2013 19:15, wrote:
Hello,

I have a Sthil FS120 strimmer/brushcutter. When started it runs okay
for a bit, but after a while it stops picking up when the throttle
trigger is squeezed. If stopped and restarted it will run at full
revs again. The trouble is when it gets warm it can only be a couple
of minutes before it fails to pick up, which slows the job down and
lots of restarting probably does not do it much good. Does anyone
know what is wrong with it?

Had a very similar problem with a chainsaw a while back. After lots of
messing about with cleaning and adjusting the carb - which generally
improved things for a while - replacing the carb was the only thing
that brought a permanent cure.

try washing and cleaning the clunk.

--
Ineptocracy

(in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.