On Saturday, July 27, 2013 2:27:01 PM UTC+1, mark wrote:
Am having great difficulties getting the waste to seal on a twin

walled/skinned bath. Acrylic bath.



The problem is that when tightening the waste fittings the two skins of the

bath move towards each other and likely to break if tightenened enough to

make a seal.

The gap between the skins is about 15mm.



Any advise please.



mark

remove waste, fill gap with plenty silicone keeping opening clear (of course) allow to set then refit waste with plenty more silicone?

Jim K