View Single Post
  #10   Report Post  
Posted to uk.d-i-y
ARW ARW is offline
external usenet poster
 
Posts: 10,161
Default Weird layer of 'something' behind plasterboard?

DaveyWavey wrote:
On 12/06/2013 19:29, Phil L wrote:
DaveyWavey wrote:
Hi,

Please excuse the newbie question, but I've spent about two hours
Googling for an answer to this, and I'm none the wiser...

I'm trying to fix some shelves to my kitchen wall. Should be simple?
Possibly not -- I can't for the life of me figure out the wall
construction.
My property is a flat, in the UK, built somewhere around 2000. Most
of the interior walls in the flat are stud walls (plasterboard over
metal studs, as far as I can tell). But the kitchen wall, whilst
interior in terms of the building itself, forms a separating wall
between my flat and my neighbour's flat. And this wall appears to
have a different construction.

I initially assumed it would be a plasterboard stud wall, the same
as the rest. But I got nowhere fast when trying to drive a
plasterboard screw into it -- it went about 1/2in, then hit
something hard, and would go in no further (and made a bit of a
mess of the wall). I investigated the wall's construction by taking the
cover off a
power outlet in that wall and having a look. From what I can tell,
the wall is constructed of:

a) a thin layer of what I assume must be plaster


yes

b) behind that, a 1/2in layer of something that resembles
plasterboard


plasterboard

(and is soft enough to screw into easily enough)
c) behind that, a 1/2in layer of something that *looks* the same as
the plasterboard, but is much harder (and cannot easily be screwed
into)


plasterboard adhesive, or 'drywall' as it's often known

d) behind that, there appears to be a gap/cavity


the adhesive is usually in dabs, and there will be gaps around the
dabs, that is, there can't be a cavity /behind/ the adhesive
otherwise it's floating in mid air

So, what I can't work out is: what the hell is layer (c)? And, more
importantly, what sort of fixings can/should I use to fix shelves to
this wall?

Any advice would be appreciated.


It's a drylined block wall, so use plugs and screws



Having drilled into it 8 times this afternoon, and fixed my shelves, I
can say with some confidence that this isn't a drylined block wall.
It's definitely two layers of plasterboard and something of the same
thickness (but harder), with a cavity behind.


How deep was the cavity?

--
Adam