Retired wrote in
:

On 6/3/13 9:56 AM, KenK wrote:
Problems with swamp cooler water distribution. One of three pads
getting little water. Tried pushing a small snake through the tubes
and they seem to be clear. Evidently the water distribution hub is
plugged up. Anyone have any ideas to clear it without disassembling
the whole distribution system? Temps are well above 100 and will get
worse as time goes on. I'm 78 with back problems. Anything other than
hiring ($$$$) it done?

All I can think of is to remove the hose and screwed in connecting
tube from the hub and try to poke a wire into the troubled tubes. I
don't have much faith in that idea and it will be very difficult to
get at.

Suggestions? Probably no easy way.

TIA



Consider trying to blow the tubes/hub clear with a can of compressed
air. Office supply stores (Staples, Office Depot etc) sell them for
cleaning computers, printers, etc.

Think that will work better than the water pressure from the cooler pump?
If so, I'll try it.


--
"Where there's smoke there's toast!" Anon