There's nothing like welcoming a new baby into the house. Congratulations!

Larry

On Thursday, April 25, 2013 12:01:50 PM UTC-5, Leon wrote:
The latest.





Bringing'r in

http://www.flickr.com/photos/lcb1121...in/photostream



Unpacking

http://www.flickr.com/photos/lcb1121...n/photostream/



Unwrapped

http://www.flickr.com/photos/lcb1121...n/photostream/



For you patent buffs

http://www.flickr.com/photos/lcb1121...n/photostream/



Setting in the hydraulic mobile base

http://www.flickr.com/photos/lcb1121...n/photostream/



The other stuff

http://www.flickr.com/photos/lcb1121...n/photostream/



A lot of cast iron inside there

http://www.flickr.com/photos/lcb1121...n/photostream/



The gears, notice the curved surface of the tilt rack to fit with the

worm gear

http://www.flickr.com/photos/lcb1121...n/photostream/



Inside the left side of the saw door opening, lots more iron.

http://www.flickr.com/photos/lcb1121...n/photostream/



A reference for just how big those gears are. The worm gear is

approximately 1-1/2" in diameter.

http://www.flickr.com/photos/lcb1121...n/photostream/





I got the industrial model and it weighs in at about 685 lbs with the 52

inch fence. Add 25lbs or so for the mobile base.



The mobile base is sweeeeeet. 3 pumps on the right front pedal and the

saw is lifted up and all weight is transferred to the 4 corner wheels.

tap the "lower" lever and the saw floats to rest on the floor releasing

all weight from the wheels. This saw being about 200lbs heavier than my

old Jet cabinet saw is much easier to move than the Jet 3 wheel mobile

base and I thought that base was great. The new saw will almost roll

out of the garage on its own when lifted up on the wheels.



At the risk of sounding like a broken record, Wow this thing is really

well built with great attention to details. No sharp edges found yet.



Ill keep you posted as the saw and out feed comes together.