On 3/16/2013 7:28 PM, woodchucker wrote:
On 3/16/2013 7:57 PM, Leon wrote:
Cheaper here

http://www.7corners.com/catalog/inde...ducts_id=45970




BTY the extension comes out from the saw far enough that the longer half
of a ripped 8' board or sheet of plywood is still on the outfeed and
saw. Read that as long enough that you don't have to balance the work
after making the cut providing it is 8' or shorter.

ALSO the older units, like mine had a fixed lower support that falls
right where the dust port is at on a SawStop TS. It appears that the
newer styles have a lower support that is no longer fixed at the bottom.
It appears to be adjustable to a different height depending on
obstacles.
Any chance that it is available as a retrofit to yours, sounds like just
an arm and bottom support.



I was looking at the "current" "design as you go" style owners manual.
It shows pictures of my style and obviously newer pictures of perhaps a
retrofit where the entire mount might be replaceable. Ill be callint
them in the next couple of days.