On 2/16/2013 2:33 PM, dpb wrote:
On 2/16/2013 2:22 PM, Mike Marlow wrote:
Leon wrote:


Hard lines with hard 90 degree turns will slow flow more so than a
hose that only has gradual bends.

That is very true, but with a sufficient compressor, it will have enough
capacity to handle that....

No, if there's too much pressure drop along the way, it doesn't matter
how big the compressor itself is (unless you can raise it's pressure
enough to compensate but until go to really large the upper tank limits
are generally roughly the same).

--
That is what I am thinking, Pressure would have to go up so that it
never dropped past acceptable after all of the restrictions.