"Ron"
"Phil Allison"
"Sjouke Burry"
Most of them consist of a FET transistor with the base floating, and
picking up signal capacitively. So any static spark can easely destroy
them, when you touch the connector.
** Hog wash.
Electret mics are not subject to any such failure mode.
In any case, the OP's mic is probably dynamic.
http://www.radioshack.com/graphics/u...ctManuals/3300...
Yep, that's the one. Funny how quickly they self-destruct.
** The mic capsule is very small and the impedance is 600ohms = lotsa hair
fine wire used in the voice coil.
Hair fine copper wire PLUS crappy Pb free solder = recipe for sudden
failures.
Hint: It's the flux....
..... Phil