On Fri, 1 Feb 2013 16:55:24 -0000, the renowned "Ian Field"
wrote:



"Jan Panteltje" wrote in message
...
On a sunny day (Fri, 01 Feb 2013 13:17:42 GMT) it happened Jan Panteltje
wrote in :


OK, but that is actually an integrated circuit.
Just mis-labeled 'transistor'.
:-)

PS,
some of us here will remember RTL logic.
That was pretty much like that, but more transistors to make gates, and
output R too.
Integrated circuits.


My first job was component level fault finding on Olympia desk calculators,
they contained about 4 boards of DTL - a 5th board at the back was
critically sensitive MOS shift registers. The boards were about the same
area as S100, but wider & not so high, the front board had about a dozen
nixie tubes.

I must've just missed out on RTL by not all that long, it was only just
becoming scarce in component catalogues of the day.

When I was a kid RTL became very available in surplus surface-mount
packages (called "flat pack"). Probably some big military change-over.
DTL didn't seem to last long.

Spacing was tight for attaching fly wires.. looks like it was
relatively coarse by today's standards- maybe 1.27mm pitch like
today's SOICs.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com