On 1/22/2013 11:23 AM, DerbyDad03 wrote:
On Jan 22, 11:27 am, The Daring Dufas the-daring-du...@stinky-
finger.net wrote:
On 1/22/2013 10:23 AM, DerbyDad03 wrote:
On Jan 22, 8:31 am, "Existential Angst" wrote:
Awl --
Ahm semi-re-plumbing the lines to the HW heater, and I noticed what appears
to be some sort of vent/pressure relief ditty coming off the *CW inlet to
the HWH*. From the CW pipe to this gadget is copper, from the gadget to the
wall is 1/2 black pipe. The 1/2 pipe goes thru an outside wall, altho I
have yet to find anything outside!
I'd be hardpressed to imagine that this thing still works, whatever it was.
I'm sure it's 25++ years old.
It's not an anti-water hammering device, afaict. Is it safe to just get
rid of this thing? City water pressure is barely 60 psi, I have gauges
plumbed into a couple of lines, very little variation.
It would make my life a lot easier if I could ignore/get rid of this thing.
--
EA
Why do you have a HW heater? Does your WH not make CW hot enough?
If you heat hot water, doesn't it boil? So a hot water heater would be a
boiler? ^_^
TDD- Hide quoted text -
- Show quoted text -
That would depend on how hot you heat the hot water.
In the average house you probably have an 80 - 90 degree range before
your HWH becomes a boiler, although we need probably need to factor
pressure (and the PRV) into the equation.
I remember Myth Busters removing the T&P valve and plugging to hole in
an electric water heater and building a little test house, filling the
heater, turning on the power and watching the thing take off like a
rocket blowing up the little house. ^_^
http://www.youtube.com/watch?v=jbreKn4PoAc
http://www.youtube.com/watch?v=9bU-I2ZiML0
http://www.youtube.com/watch?v=rGWmONHipVo
TDD