View Single Post
  #4   Report Post  
Posted to alt.home.repair
bob haller bob haller is offline
external usenet poster
 
Posts: 3,644
Default Propane torch problems in winter

On Jan 19, 8:16*am, "Stormin Mormon"
wrote:
Keep the torch and tanks indoors, so they don't get badly cold?

Christopher A. Young
Learn more about Jesus
*www.lds.org
.

wrote in message

...
Why is it that whenever I use a propane torch in winter, it causes all
kinds of problems. *This never happens in warm weather. *And of course
the torches are needed more in winter, for thawing frozen yard hydrants
and everything else that screws up due to winter cold.

First off, the torches never seem to burn properly in cold weather. *I
guess the propane is cold so it likes to shoot out flat flames that spit
an sputter and generally be a pain in the ass to use.

But that's just part of the problem. *The bigger problem is when the
torch refuses to shut off after using it. *I can only guess that
frost/ice builds up on the valve. *They never shut off.....
So, the solution to that is to unscrew the torch head from the
disposible cylinder tank. *That shuts off the torch flame, but it never
fails, the tank continues to expell gas from the valve where the torch
head was connected. *The solution to that seems to be to take the tank
into a heated space, and once they heat up, the quit leaking. *However,
taking a leaking propane tank indoors where there are pilot lights and
stuff, not to mention having to breathe raw propane, means that the only
thing to do is leave the tank outside.

Thus, the next day the tank is empty!!!

So, buy a new tank of propane for each and every winter job you do, and
the rest of the gas goes to waste into the air.

Has anyone ever found a solution to this????


my gas grill has issues like the OP. We grill all year long.

Occasionally when its very cold I bring the tank indoors and put it in
my kitchen sink and run hot water over it, otherwise the gas remains a
liquid and the fire burns poorly.

AAs to gas wouldnt shut off I had that occur to my torch I think the
OP should try a new torch with MAPP gas. since i went to mapp all
these problems ended and soldering copper lines got far easier,
because of the higher temperature map burns at.