Thread
:
Problem with Samsung Blu-ray player - model BD-P1600: when switched on, stays on "LOAD", won't go to "NO DISC"
View Single Post
#
4
Posted to sci.electronics.repair
Gary[_13_]
external usenet poster
Posts: 12
Problem with Samsung Blu-ray player - model BD-P1600: when switched on, stays on "LOAD", won't go to "NO DISC"
On Tue, 8 Jan 2013 12:12:28 -0800 (PST),
wrote:
If you have the ability to open up this unit. Try cleaning hte lens using a cotton swab and alcohol. It would appear that the unit realizes that a disk is present, but cannot complete the intiial loading of info from the disk. This can hapen if the lens has a film on it from smoke or grease or any other particulate matter. A word of caution: Please be careful when cleaning the lens and use as little pressure on the lens itself as possible. Very fine wires suspend the lens and are easily broken.
Please keep us posted on your progress.
Dan
It turns out that this problem is not uncommon. There's a whole page
about it he
http://forums.cnet.com/7723-13973_10...ockup-problem/
I've tried disabling Anynet and resetting the box. Time will tell if
it's a permanent fix.
Reply With Quote
Gary[_13_]
View Public Profile
Find all posts by Gary[_13_]