On Wed, 12 May 2004 16:19:00 GMT, Tim Hurd
wrote:
I'm building a workbench that I originally designed to have a series of
3/4" x 3/4" bench dogs. I'm about to cut the dogs, but I came across
some 8-1/8" bench hold down clamps:
http://www.harborfreight.com/cpi/cta...emnumber=41885
So, which should I go with? The dogs or the clamps?
The workbench will have no specific mission, just a general workbench.
The dogs are 3/4" square and the clamps are 3/4" diameter.
Thanks.
Take a look at this month's Woodsmith (Vol 26, #153) -- one of the
readers' tips has what looks to be a rather interesting, inexpensive way to
have both.