Radiator removal tips
On 19/12/2012 16:35, Huge wrote:
On 2012-12-19, BartC wrote:
Tried to remove a radiator for flushing, but the nuts attaching it to the
valves are encrusted in several layers of paint.
Chipped some off but wouldn't budge (not without it breaking something).
(And I think I turned them the right way..)
Any ideas on how to free them up? Almost resigned to just replacing the
radiator and the valves as well, but I don't want the bother of draining
down the system.
Big spanner. Great care.
Agreed, can be a PITA. Threads may also be "glued" with dried up Boss
White. This can be softened using a normal gas torch. Try heating the
nut about as much as you would do to make a solder joint on "dry" pipe.
It won't get as hot because of the water inside, of course.
The right way is the wrong way (if you see what I mean) because the nut
unscrews from the valve towards the radiator, with a right hand thread.
It is as if you were trying to screw something into the radiator.
|