On 16/11/2012 14:13, Mr Pounder wrote:
"stuart noble" wrote in message
...
On 15/11/2012 19:05, Mr Pounder wrote:
"stuart noble" wrote in message
...
On 15/11/2012 18:16, Mr Pounder wrote:
"stuart noble" wrote in message
...
On 15/11/2012 18:02, Roger Mills wrote:
On 15/11/2012 13:42, stuart noble wrote:
The spout on our kitchen mixer tap has always been a bit stiff so I
thought I'd take it off and have a look. Problem is, the grub screw
at
the back is too close to the tiles to get any sort of screwdriver in
there. I had thought I could hold a bit in a pair of mole grips, but
even that's too long. The gap I have is around 23mm. An allen key
with
a
phillips/pozi head might fit, but is there such a thing? I'm sure
plumbers must have encountered this problem.
Cheers for any advice

I'm not quite sure from your post whether the screw has a socket for
an
Allen key, or whether it's Pozi.

However - whichever it is - I assume that you've got a bit which fits
it? The bit is presumably hexagonal is section, to fit a normal
driver?
Rather than use a Mole Wrench, why not rotate the bit with a suitably
sized ring spanner? If the bit is too long for the available space,
grind some off the non-working end.

Chicken and egg. I think it's a pozi but I can't tell for sure because
the
bit's too long. Yes, it's angle grinder time.
I'm guessing the grub screw has no effect on how freely the spout
moves,
and I'm now wondering whether there's anything I can do even if I take
it
apart

Did you even read my post?


I did, but it's not an allen key. It's either pozi or philips. My allen
keys are shorter and there would be room for them if they had a pozi or
philips head. Did you even read mine?


Well, thanks for saying taa for the effort Mr Pounder.
I tried to help and was ignored.
You just have to be a southerner.



If you don't want to be ignored, you should perhaps read the post before
replying. It's not like it was long and rambling. Sorry and all that, but
it's normal to thank one and all when the thread dies. If you want
individual thanks you're probably in the wrong place.


Don't try to tell me what is normal in a thread.
Have you even tried a blast of WD 40?


Yes, and I've even said why that doesn't work