View Single Post
  #3   Report Post  
Charlie Self
 
Posts: n/a
Default FWW bandsaw review unbalanced?

Bob Davis writes:

Fine Woodworking did a bandsaw review in the June issue. It was
interesting and made some good points. However, it seemed a bit
unbalanced to me. First, the Minimax was unavailable for the their
review. How could one of the best bandsaws not be available?


Would you beliee deadlines do have an effect? And the question, really, should
be aimed at the distributor of the tool, not the magazine.

econdly, they imply they are comparing equal bandsaws, yet they
tested the high end 5 hp model from Laguna at $2995. Its in a whole
different class with its 17" resaw capacity. I don't understand why
they didn't select the more equal 3 hp model at $2195 which is more
the equivalent (spec/horsepower) to the other models tested.


Company didn't want to supply it?

They also mention things like difficulty in changing blades and
adjusting guides, but didn't seem to give much weight to these factors
in the overall rating. They seemed to be weighted toward such silly
things as how fast the saw cuts. What good is a saw that cuts fast,
if you have to spend lots of time changing blades and its difficult to
adjust?


I've changed blades on a number of the machines they rated: it is a bit of a
nuisance at first with fiddly guides, but you get the hang of it fast, too.
We're not exactly talking brain surgery here. If speed of cut is silly, WTF is
everyone interested in bandsaws with more than 1 HP?

Why would you have to spend lots of time changing blades, anyway? Get a good
quality blade, and it lasts a decent time with some exceptions--teak ruins
blades quickly. I don't recall them talking of the blades being all that
difficult to adjust, but in most cases the guides were a bit of a trial. As I
said, you get used to whatever it is you're using, or you buy a set of Carter
guides.

I'd have tried to do it differently, but I might not have succeeded. I tested
some big bandsaws for WWJ a few years ago, and it was a trial and a half just
gathering the machines. Some of the distributors don't seem to import more than
a dozen of any one model in any one year, so you often can't get what you want
to test, but you don't want to leave that maker out, if it is at all possible.
So you test what they choose to send, which is, more often than not, a higher
end model.


Charlie Self
"Wars spring from unseen and generally insignificant causes, the first outbreak
being often but an explosion of anger." Thucydides