Thanks, I've looked at both just couldn't match up the specs between both to
see if compatible. It looks like they're made to be mated to various drill's
so most likely will work and really couldn't find any other then Delta &
Jet. I got that quill down now.

I'm making some furniture and initially really had the hot's to get the
mortising kit, but fustrated went out and bought wood chisels. Not too bad,
got it down to 10 minutes per hole.

Thanks, Again!

Joe


"AArDvarK" wrote in message
news:LZ8ic.20248$432.19062@fed1read01...

The quill is the metal cylinder that holds the chuck
and you see it travel down to drilling. From what
I have found in my own searching of recent as a
"newby" is the smallest size quill (in diameter) that
will accept the attachment is 38mm, you'll need a
basic vernier caliper to measure it. Most that you
can find new or used should fit any basic stand or
bench drill press. Made by both Jet and Delta.
If anyone else knows what other companies make
mortising attachments, I'd like to know, please.
That one is a very hard search on the 'net.

Alex


"130.81.64.196" wrote in message
...
in the least can someone what is the diameter of the Quill? and/or
recommend
a
mortise kit attachment for it???





ts