Michael A. Terrell wrote:

Cydrome Leader wrote:

Michael A. Terrell wrote:

Cydrome Leader wrote:

Michael A. Terrell wrote:

Yawn. What have you designed that can track up to 256 ports, and
make sure the OS keeps track of what is connected to that port so the
proper driver is used for the device?

USB can't even keep track of 1 device moved between two ports, so I don't
know what your 256 port chatter is even about.


So, you're clueless, stupid & bitter. Got it. All the computer is
doing is telling you that the device wasn't used on that port before.
Try swapping an external RS-232 modem & RS-232 mouse on an old PC and
you'll be doing all of the work yourself rather than just see a popup.

you don't know what you're talking about is the problem here.

take for example an epson 1680 scanner, or tons of other devices.

moving it will require a reinstallation of the driver, and you can't
just point windows at the location of the drivers, which are already
there. Printers are notorious for this bull**** too.

Back to the scanner- if you use with with the SCSI interface and change
IDs it doesn't require a reinstall.


Then buy any SCSI card & any SCSI scanner. The expensive cables, the

that's what I have. The same scanner has USB and SCSI. ONly the SCSI part
works with no fuss.

teminator and have fun. Of course, there are lots of incompatable SCSI
intefaces, and hardware. Try plugging a modern SCSI drive into an

Ok so HVD and anything else isn't compatible. The rest are.

original SCSI card. Have you ever seen a SCSI cable catch on fire? I
have, when the conductor for power to the terminator left a empty, burnt
piece of plastic in the middle of a 50 conductor ribbon cable when the
internal active teminator failed with a dead short petween that pin and
the grounds. Let's see you do that with a current controlled USB port.

your sad little computer fire has nothing to do with USB sucking ass.