On Aug 22, 1:09*pm, "HeyBub" wrote:
Lee wrote:
Garbage disposer failed and original diagnosis (mine) revealed no
power to the top-half of outlet that both the GD and dishwasher plug
into; the dishwasher worked fine. *So, I replaced the outlet,
clipping the joiner-part of the outlet, and still no power to the
top-half of the outlet, so I reversed the plugs and the dishwasher
was still active, so that ruled out the outlet as the problem. *I
tried the reset button on the disposal several times in both halves
of the outlet and neither worked, so I concluded the problem was the
garbage disposer itself, so replaced it. *Now, it works,
continuously; but the switch does not. *So, I presume this means I
need to also replace the switch, but is there anything else I should
be considering/looking at before proceeding to this step?

Thanks for any suggestions/comments you’d care to make.

The switch is okay. The problem is in the wiring.- Hide quoted text -

- Show quoted text -

Basically, the outlet is wired so that one half gets power from a
always-on circuit, while the orther half gets power from the switch,
which can be either on or off. This is why you need to clip the
joiner between the two halves.
You should have two wires (hot and neutral)going to each half. From
your description, it sounds like the switch may be bad, or the wiring
to/from the switch,