Dave Plowman (News) wrote:
Rather stupidly, I left the rear speaker in place when the old Rover was
having a new rear wing fitted. Which is welded on so removing the old one
would have produced some steel swarf or whatever when drilling out the
spot welds - and a lot of it has ended up in the speaker. It's a fairly
pricey aftermarket 6x9 with a pair of tweeters mounted on a post in the
middle, and the swarf has got down between that and the voice coil former.
Any ideas on how to remove it? The post itself isn't the magnet pole piece
- it appears to be plastic. No idea how it's held in place - there are no
wires to the tweeters showing.

plasticene has worked for me once or twice. also vaseline on a card
followed by alcohol to get the grease out

its possble that compressed gas/air might blow it out as well.


I assume the spider is still intact?



--
Ineptocracy

(in-ep-toc-ra-cy) €“ a system of government where the least capable to
lead are elected by the least capable of producing, and where the
members of society least likely to sustain themselves or succeed, are
rewarded with goods and services paid for by the confiscated wealth of a
diminishing number of producers.