View Single Post
  #2   Report Post  
Posted to sci.electronics.repair
Mark Zacharias Mark Zacharias is offline
external usenet poster
 
Posts: 269
Default Cassette head reversal problem

"N_Cook" wrote in message
...
Well heads rotate perfectly well on both decks , Aiwa AD WX 888 but going
in
batches , for each deck, either tape will not change direction , or will
work
consistently ie unreliably, mostly unreliable.
Drops into an illegal mode where both spools are powered in opposiste
directions and both pinch wheels are engaged , so likely to stretch or
break tapes. This action is initiated by a solenoid then PTO mechanics ,
perhaps one flip for normal play in whatever preceeding direction set
before
stopping . Then longer pull or 2 pulls or something more complex
to change direction of play , not explored yet manually. Could this rely
on
a timing adjustment somewhere that would apply to both decks ? I have
replaced both drive bands and the speed of both decks is as good as I can
get them via strobing and test tape.






Normally this is only possible on a dual-flywheel single direction deck with
the belt threaded wrong.

If this one were to use motor reversal during reverse play, perhaps the
capstan belt could be threaded wrong after all?

Mark Z.