On 7/26/2012 1:12 PM, Swingman wrote:
On 7/26/2012 11:57 AM, Leon wrote:

I would suspect a damaged Forrest blade. These things get tossed around
during shipping just like everything else.

Seeing how all cuts were made on the same saw, with the same setup, I
see no other explanation ... that particular Forrest blade is apparently
not up to the standards we are used to.

I would return it regardless.

That said, it would interesting to try both blades on a well setup
cabinet saw to see the how they fare.

I've seen quite a few inexpensive blades made the first few dozen cuts
quite nicely, but you generally needed three or four blades to get
through a project; while a Forrest will take you through a dozen or more
of the same size projects with the same quality cuts.


Still the quality of cut from a Forrest I never see saw marks unless the
blade is dull, or the piece didn't get fed through right (ie pulled away
from fence)

I still don't suspect the blade. I suspect the saws alignment.