On 7/10/2012 3:53 PM, Bill wrote:
Bill wrote:
....

I'm ready to take a shot at it.

Remember the actual offset you need is 3" _plus_ half the thickness of
the joist _plus_ has the conduit OD to get have it against the far side
of the stud and centered on the joist...at least if the location of the
measurement in your drawing is correct, that is.

I'd still just do the offset in the horizontal plane, and then down and
inset (I forgot the header in the other conversation w/ Mike).

Of course, you could simplify a whole lot if the wall is going to be
covered by simply notching...

--