"Arfa Daily" wrote in
:



"Jim Yanik" wrote in message
4...
"Arfa Daily" wrote in
:



"Michael A. Terrell" wrote in message
...

Jim Yanik wrote:

I'm still trying to figure out why epoxy was used to hold a SMD on
the board? thermal-conductive epoxy?


I've never seen epoxy used to hold a part to a PC board. A tiny
dot
of a red glue was used on our boards, and it would release when you
desoldered the transistor leads. Any rework at the factory level
used very thin solder wick to remove the solder, and a very thin
curved 'dental pick' to lift each lead while the joint was still
hot.
If the glue was still holding, you touched the transistor with the
soldering iron to free it. If you worked fast enough, the glue was
loose when you unsoldered the last lead.

If I can find my old rework tools, I'll make a video & put it on
Youtube. I'm finally able to spend a little time in my shop, after
5+ years of health problems.


Glad to hear you're feeling better Michael. How is it in Fl at the
moment? We're seeing pictures on the TV here of widespread flooding
and power loss down the eastern seaboard, I think they said ??

Arfa



Ocala and Panhandle-area got the worst of it,with a lot of new
sinkholes. It's a bummer when a big hole opens up next to or under
your house and things start falling into it,your foundation and walls
crack,or part of your home literally breaks off.

Central Florida(Orlando area) didn't fare too badly. Our drought had
kept the lakes and retention ponds low so there was plenty of room
for all the water. We're still 2.5" below normal for rainfall.

--
Jim Yanik
jyanik
at
localnet
dot com


We're due out there in Jan or Feb '13, but I guess it will all be back
to normal by then ...

Arfa



We had some good,hard rain last night.
a lot of plant debris on the ground this morning,during my daily bike ride.
The pool this morning was like bath water,almost body temp,even after the
rain.

it will be nice and "mild" for you in those months,but "cold" to me,I've
been here long enough to be acclimatized.
February is usually nice,it's warming up by then.

--
Jim Yanik
jyanik
at
localnet
dot com