On Jun 29, 11:40*pm, Harry K wrote:
On Jun 29, 6:46*pm, Tony Hwang wrote:
wrote:
I just put in a frost free faucet. *It was working OK for a while but
then it started to get not come on. *If I played with it (off, on,
off, on ) then it would come on. *Now no matter what I do it won't
come on. The water is turned on to it so I'm sure that is not the
issue and water does go to the pipe. *I'm thinking somehow it is the
frost free faucet. *Any suggestions on how to repair it?
Hi,
You are the one who put it in. You are the one who should know best
what's going on.
Good advice except: *Ever try to take one apart? *The only time I
succeeded is after I dug it up, put it in a vice and used a BIG pipe
wrench. *they are screwed together so tight you can't dissassemble in
place. *At least I haven't succeded with 4 of mine and I tried them
all.
If I ever replace one of my bad ones, I will take it apart and
reassemble with reasonable torque before I install it.
Harry K
LOL, seeing as you it has to be taken apart
prior to the connection being soldered, umm...
Yeah...