On Wed, 06 Jun 2012 15:31:57 -0700, Jim Thompson
wrote:
On Tue, 5 Jun 2012 22:12:30 -0400, "Tom Del Rosso"
wrote:
Jim Thompson wrote:
On Tue, 5 Jun 2012 18:28:22 -0400, "Tom Del Rosso"
wrote:
Jim Thompson wrote:
On Wed, 23 May 2012 15:40:17 -0500, "Dave"
wrote:
Posted a while back about a project I am trying to concoct- an
intercom for my front door- and have made some progress.
Unfortunately I hit a speed bump when I added transistor Q4.
Now it only gives me noise at the output, and lots and lots of
that. Capacitors are all 100uF 35V, which I am thinking may be
the problem (maybe the last couple need to be 50 or 75V?)
Originally thought I might be overdriving Q4, so I replaced it
with a 2N5296 from my junkbox, but that just doubled the volume
of the noisy output. If anyone sees something I should but
don't, please post. The only thing I can think of is upping the
voltage on C8 and C9.
Any help is *greatly* appreciated...
Dave
Back up and do a little math. Calculate the bias current in that
last stage. (In fact, calculate all your stage biases.)
In my head, it's 14ma. That can't be right. The calc concurs. Is
that a little bit too much?
Aren't the emitter caps about 10 times as big as needed?
Ian did notice that he was just throwing gain at the problem though.
Yep, I was stunned... Ian said something cogent. But his buddy, Dave,
is beyond all hope... rude little POS.
I don't have AoE in reach, but I don't think they mention bias current in
their approach to design. They approach it with the rule of thumb that the
input impedance should be 10x the output impedance of the previous stage.
Similar. (The input impedance of the OP's stages are only slightly higher
than the previous output impedance.)
I'd like to know if you use any rules of thumb for this sort of thing. Or
is everything just optimized by multi-variable calculus? 
The 10X impedance is a good rule-of-thumb for general hacking.
I tend to be an over-calculator, so I know every interaction.
I am blessed with an ability to "walk" circuits in my head and see
their functions (and faults) in a matter of seconds.
****es lots of people off, when I instantly say, "Can't be" :-)
...Jim Thompson
Gosh, you are wonderful. Tell us more about how smart you are, how you
know everything, and how much you enjoy ****ing off people who aren't
as smart as you are. Are who aren't the superb marksman (at 30 feet)
that you are.
--
John Larkin Highland Technology, Inc
jlarkin at highlandtechnology dot com
http://www.highlandtechnology.com
Precision electronic instrumentation
Picosecond-resolution Digital Delay and Pulse generators
Custom laser drivers and controllers
Photonics and fiberoptic TTL data links
VME thermocouple, LVDT, synchro acquisition and simulation