Thread: Wiper motor
View Single Post
  #9   Report Post  
Posted to uk.d-i-y
Dave Plowman (News) Dave Plowman (News) is offline
external usenet poster
 
Posts: 43,017
Default Wiper motor

In article ,
Gib Bogle wrote:
While testing things I noticed my battery voltage was very high (I'd
just been running the engine). With the engine running the charging
voltage is about 19v. A new, probably more serious, problem. It's a
bit of a coincidence, so I'm wondering if they are linked. Could the
high battery voltage have caused the motor to fail? I'm familiar with
low or no voltage from the alternator, but I don't know what can cause a
high voltage.


Assuming your DVM hasn't failed - it is reading some 12.5v from the
battery with the engine stopped? - the alternator regulator has failed.
This is usually internal to the alternator but can be replaced for about
£30 if you can be bothered finding one.

Unless the rear wiper was in use for a long period, it's unlikely this
high voltage will have caused it to fail.

--
*Don't byte off more than you can view *

Dave Plowman London SW
To e-mail, change noise into sound.