On 5/27/2012 2:47 PM, dpb wrote:
On 5/27/2012 1:57 PM, dpb wrote:
On 5/27/2012 11:18 AM, Swingman wrote:
....

While your above method will almost certainly reduce the chances of a
catastrophe like the one described, it may also mean you end up with a
less than perfect "zero clearance" for obvious reasons of slight
movement.

Never seen it...
...

Movement where? The insert is in the cutout in the saw; all that's
needed is enough downward pressure to keep it from coming out during the
cut. It isn't going anywhere laterally unless it doesn't fit the opening
in which case it won't be precise, anyway.

Don't take my word for it. Watch the video link provided, where the guy
is indeed using a PM 66 fence.

http://www.youtube.com/watch?v=1eZ9QaOeUxM

FastForward to 2:25, if so inclined.

--
www.eWoodShop.com
Last update: 4/15/2010
KarlCaillouet@ (the obvious)
http://gplus.to/eWoodShop