On May 16, 2:57*pm, "Doug" wrote:
On Wed, 16 May 2012 10:19:53 -0400, "TomR" wrote:
Mike wrote:
I'm trying to research the cost of a new roof.
I have a old house built in 1900.
It's 2.5 story house. *There's about 1100sf on the 1st and 2nd floor..

The measurements of the roof line is 33 by 33 and the pitch is very
steep.

I'll need a total rip off along with new decking.
I'm interested in 40 year dimensional asphalt shingles.

I hoping I can keep my gutters since I replaced them about 3 years
ago.

Is this all possable for under 12k.

Any imput would be helpful
Thanks

The good news is that it is easy to get a couple of estimates for this type
of job. *It is pretty much a straight up job that doesn't require a lot of
explanation. *You would just let the contractors know that it is a complete
tear-off down to the rafters and that you want all new decking and 40-year
dimensional asphalt shingles, and that you would like to be able to keep the
existing gutters and downspouts if they think that is possible.

You don't even have to be there when they do the estimate although if it
were me I would want to be there and hear what they say, see what they are
like to deal with and talk to etc.. *But, since they do not need to go into
your house to do the estimate, they can do it anytime without you having to
meet them there.

Your 1100 sq. ft. estimate may or may not be correct. *If any of the roofers
do measure it and tell you the actual number of "squares" it is, that would
be good to know. *A "square" is 100 sq. ft. (10' x 10'). *If your estimate
of 1100 sq. ft. is correct, you have 11 squares.

I don't think so. *His roof is on a steep pitch not flat so it's going
to be more than 11 squares. *And then the roof may have misc on it to
add to that. *Bottom line is more than 11 squares.- Hide quoted text -

- Show quoted text -

As I said/asked in an earlier post:

Why does it matter how many squares the roof is?

The final price is going to be the final price based on not only the
size of the roof, but any other work that may need to be done.

If 3 or more contractors give estimates within a reasonable range of
each other, adjusted for differences in the actual work they'll do and
what materials they will use, what does is matter if the roof is 11
squares, 111 squares or 1.1 squares?

I had 5 estimates and not one of them included the number of squares.
4 of the 5 were within a few of hundred dollars of each other for the
tear-off/re-roof portion of the estimate. One was way out of line for
other reasons.

Why does the number of squares matter - unless, of course, you are
buying your own material?