On Sun, 6 May 2012 21:04:05 -0700, "David Farber"
wrote:


This machine was never opened before so I'm going to say that the wheel was
made as cheaply as possible. It was stored for a while and maybe sitting
around in the garage may have exposed it to temperature extremes. In any
case, thanks for the great links. That allowed me to search for the rubber
ring
http://www.sewingpartsonline.com/bob...x55238051.aspx
($4 + $3.25 shipping) instead of the whole assembly (~$19 + $11 shipping).

I don't think that will work. That's for a babylock series machine.
The CS-80 is not listed on the list of compatible sewing machines for
the rubber tire. There was also a note on one of the pages I listed
indicating that the rubber tire was NOT available seperately. Unless
you want to experiment, methinks you will need to purchase the entire
assembly.

Nothing useful in the manual:
http://homeappliance.manualsonline.com/manuals/mfg/brother/cs_80.html

If you want to go cheap, measure the size of the rubber tire and visit
your local plumbing or hardware supply store. Dig through the pile of
rubber faucet gaskets for something similar. The exact shape and size
is not very critical, as long as it makes contact and doesn't slip. If
you're really cheap, get a slightly larger o-ring, cut it to size, and
glue the ends with cyanoacrylate adhesive. There might be a slight
bump as it turns, but it won't affect anything.



--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558