Thanks

a.. 3
Adjust the travel dial using your flathead screwdriver. The back of the
garage door control unit should have two dials that are inset in to the
units case. The dial on the right hand side will reduce or lengthen the
amount of travel the door has, based on which way you turn it. If the door
isn't closing all the way, adjust to the left. Adjust a one-half turn and
open and close the door. Adjust either way as necessary.

a.. 4
Adjust the torsion dial with the screwdriver. The torsion dial is on the
left hand side on the back of the control panel and regulates how much
pressure the door has when opening and closing. If you can't get the door to
go up when it's down, you may have to raise the torsion by turning the dial
to the right. If the door closes and then starts back up, you might have too
much torsion.


Read mo How to Adjust a Craftsman Garage Door | eHow.com
http://www.ehow.com/how_5523392_adju...#ixzz1tR0rucY1