On Apr 27, 1:25*pm, Rebel1 wrote:
The hinges at both ends of the board are damaged. The worst end is hehttp://www.flickr.com/photos/9027891...in/photostream

I'll use a wood glue and clamps to fix the separation. However, what do
I use to fill the holes that the hinge screws go into? It has to be
liquid to flow to the bottom of the presently-stripped holes, yet when
dry strong enough to accept screws?

Thanks,

R1

Ordinary wood glue might be a bit marginal with he chip board you
have. Consider a slow cure epoxy for a better repair, which could
serve better for the hole repair with toothpicks, or even epoxy in a
small dowel for serious holding power.

Joe