I did, but I also remember reading somewhere that the switch on 1182Z is OK
for 220V operations although the manual states otherwise.
"Alan Bierbaum" wrote in message
...
Read page 6 of the manual (available online ar Grizzly.com).


On Wed, 24 Mar 2004 21:11:21 GMT, "Pradeep Gupta"
wrote:

I just did some trial runs on 4 to 6 inch wide oak and maple boards. The
results were excellent.And the machine sounds very smooth and
businesslike,
because I did level my knives carefully. I will enjoy this machine for a
long time.
By the way, does anyone have any info on wiring this motor for 220V
rather
than 110V. I do have both in my garage, and it would be more convenient
to
run at 220V because my DC is also 220V.I cannot see the motor template
because the base cabinet is a solid cabinet with the motor name plate on
the
wrong side, and the Grizzly documentation does not include any details on
motor circuit.

Alan Bierbaum

web site: http://www.calanb.com