On 2012-02-23, Michael A. Terrell wrote:
"DoN. Nichols" wrote:
On 2012-02-22, Michael A. Terrell wrote:
[ ... ]
I know the owner of one cal lab, and a guy that buys and resells test
equipment with an industriaal building full. I'll give you their
information if you are able to make the parts.
The only one that I currently *know* that I can make is that
gear at the switch end, and so far I need the old hub to mount it on.
I *know* that I can't make the bevel gears, or the mixed
bevel/spur gears which are in that assembly. Those really need to be
cast/molded.
I should be able to make the long spur gear, but is is highly
unlikely to fail in my opinion.
There are some simple flat gears, like used in their signal
generators to drive the variable capacitors. someone on the antique
radio newsgroup is looking for a gear for the HP 606.
Hmm ... probably I would have to purchase more gear cutters.
They tend to be rather expensive these days, and I had to purchase one
for the Tek gears. 32 DP, 20 degree PA of the proper size for a 20
tooth gear. This can add up if I have to keep buying those.
[ ... ]
It was about an hour from my house, but even then I couldn't go every
year.
At a half hour, I would not be able to resist. :-) However, from
Northern VA, it is a bit far, especially back when I was expected at
work after the weekend. :-)
That week was always vacation time. 
I couldn't afford to take that as vacation. I never had that
much saved up at a time. :-)
Thanks. I've only seen two Sun computers in this area, but who knows
what will turn up?
While I have ten of them of various ages running in this room
alone. :-)
I only have eight computers in my bedroom right now. The rest are
off, to keep from having to run the A/C today. They can make this 10' *
10' room quite warm. It is supposed to be a child's bedroom, but it is
right newt to the bathroom, and I am very uusteady when i first wake up,
so the larger bedrooms are used for storage. 
This is a larger room, of course, and in practice is our living
room. :-)
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. |
http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---